The guide · five steps
From QR code to film in under a minute.
Two screens: this one shows the poster, the phone does the looking. Everything below is what happens on the phone, in order.
- 01
Open the scanner on your phone
Point the phone’s camera at the QR code and tap the link it offers. It opens in Safari on an iPhone or Chrome on Android. If it opens inside LinkedIn, Instagram or WhatsApp instead, use “Open in browser” — in-app browsers often refuse the camera.
- 02
Tap “Enter AR Experience” and allow the camera
The phone asks for the camera once. Nothing is recorded or uploaded; the tracking runs on the phone. The 20 MB film only starts downloading after this tap.
- 03
Reveal the poster on this screen
Press “Reveal the poster” on this page. It fills the screen; use Full screen for a bigger target. A printed copy works the same way — download the poster below.
- 04
Point the phone at the poster
Get the whole poster inside the scanning frame, about an arm’s length away. Turning the phone sideways helps — the poster is 16:9, so it fills more of a landscape view and locks faster.
- 05
Watch the film play on the poster
Once the poster is recognised, a thin frame draws around it and the film fades in on top. If you look away, it picks up where it stopped when the poster comes back into view.
Once the film is playing
Five buttons, and a card at the end.
Sound
Mutes and unmutes the film. The audio is panned towards the poster when the phone allows it.
Blow to fly
Blow at the phone and the kites rise. This is the only button that asks for the microphone.
Portal
Opens a window behind the poster into three layers of skyline, so moving the phone slides near rooftops past far ones.
Capture
Saves a photo of the poster with the film playing on it.
Full screen
Leaves AR and plays the film flat across the phone, from the same point.
The end card
When the film ends it doesn’t stop dead. A card offers Save contact (a vCard straight into the phone’s contacts), Watch again and Back to AR.
If it won’t lock on
The tracker reads detail, so give it detail.
It recognises the poster from 5,218 points of contrast — rooftop edges, kite strings, window frames. Glare, dim screens and a cropped view hide them. One limit no setting fixes: a hand-held print bows, and the tracker assumes a flat sheet, so a curled printout wobbles more than a screen.
It keeps saying “Scanning…”
Turn this screen’s brightness up, press Full screen, and step back until the entire poster — all four edges — is inside the frame on the phone.
The film shakes or drops out
Hold still for a second after it locks. Avoid reflections from a lamp or window across the screen; glare erases the detail the tracker reads.
The camera never starts
You are probably in an in-app browser. Open the link in Safari or Chrome. If you said no to the camera earlier, allow it again in the browser’s site settings.
No sound
Check the 🔊 button, then the phone’s silent switch. Phones block sound until you tap something, which the Enter button counts as.
No second screen, no printer
The scanner’s start screen has “No poster? Watch the film”, which plays it flat on the phone.
5,218
keypoints the tracker looks for in the poster
1
static HTML page — no build step, no backend
0
apps to install, accounts to make or data uploaded
Rather watch it flat? Same film.
The poster carries the same cut that opens the homepage. The source for the AR page — one HTML file, the compiled poster target and the film — is public.
